18V Massage Gun Charger Replacement for Hypervolt 2 Pro Hypervolt 2 Hypervolt Go Hypervolt Go 2 Vyper 3
4.4Editor score
Broad 18V model coverage
ETL CE FCC RoHS certified
Multiple electrical protections
Six-foot power cable
In this guide
Finding a replacement charger for a Hyperice or Hypervolt massage gun starts with identifying the correct voltage, model number, and charging-port design. These devices do not all use the same adapter, and a visually similar plug can still be electrically incompatible. A useful replacement should match both the power requirements and physical connector of the original equipment.
We compared ten replacement chargers using the information supplied for each listing, focusing on supported Hyperice and Hypervolt models, electrical output, input range, connector references, cable length, stated safety protections, and warranty or exchange coverage. The guide covers both 18V and 24V systems, including newer Hypervolt 2-series, Go-series, and Vyper models.
Each review explains who the charger is likely to suit and where its compatibility claims end. The top selections distinguish broad 18V support from 24V and 26V alternatives, while the comparison table makes voltage and model differences easier to scan. Product availability and prices can change, so confirm the listing and model details before ordering.
Top 3 Picks for Best Hyperice and Hypervolt Replacement Charger
18V Charger for Hyperice Hypervolt 2 2 Pro Go 2 Massage Gun
4.4Editor score
Supports Hypervolt 2 series
Works with Go models
UL-certified power cord
Six-foot power cable
Dexpt Charger Fit for Hypervolt Charger Hyperice Hypervolt Plus Massager
4.4Editor score
Supports 24V devices
26V maximum output
Specified barrel connector
One-year manufacturer warranty
Top 10 Best Hyperice and Hypervolt Replacement Charger in 2026 Compared
The comparison below groups the ten chargers by their stated voltage, compatible device families, connector details, and support features. It is designed as a compatibility reference, not a substitute for checking the model number printed on your massage gun and the specifications of its original charger.
ProductsSpecificationsEditor scorePrice
Best Budget
18V Hypervolt 2 Pro Charger
18V DC output
100-240V AC input
5.9-foot cable
Hypervolt 2 and Go
4.3Editor score
Editor's Choice
24V Hypervolt Power Cord
24V DC output
110-240V AC input
One adapter included
Not for 18V models
4.1Editor score
Best Premium
Superer Hypervolt Charger
26V maximum output
24W maximum power
ETL certified
24-month warranty
4.3Editor score
DONYOIE 18V Hypervolt Charger
18V DC output
100-240V AC input
Six-foot power cable
UL-certified cord
4.4Editor score
18V Hypervolt Go Replacement
18V DC output
100-240V AC input
5.9-foot power cable
Protected DC connector
4.3Editor score
VHBW 18V Hypervolt Charger
18V DC output
100-240V AC input
Six-foot power cable
ETL CE FCC RoHS
4.4Editor score
18V Hypervolt Go 2 Charger
18V DC output
100-240V AC input
4.9-foot power cord
Multi-protection system
4.1Editor score
VHBW 24V Hypervolt Charger
24V one-amp output
100-240V AC input
5.9-foot power cord
Travel-friendly housing
4.2Editor score
18V Hypervolt 2 Power Cord
18V one-amp output
100-240V AC input
Six-foot power cord
UL FCC certified
4.0Editor score
Dexpt Hypervolt Plus Charger
26V maximum output
24W maximum power
5.5 by 1.7 millimeters
One-year warranty
4.4Editor score
1. 18V Hypervolt 2 Pro Charger – Broad 18V Model Support
18V Hypervolt 2 Pro Charger
18V DC output
100-240V AC input
5.9-foot power cord
CE FCC listed
This 18V replacement charger has a 4.3 rating and supports several widely used Hyperice and Hypervolt families, including the Hypervolt 2 Pro, Hypervolt 2 53200 038-00, Hypervolt Go 55000 001-00, Vyper 2.0, Vyper 3, and Vyper Go. Its broad model list makes it a practical starting point for owners of the listed 18V devices who need a replacement wall adapter and power cord.
Pros
- Covers several 18V families
- Worldwide input range
- Clear model exclusions
- Useful cord length
Cons
- Not suitable for 24V models
- Compatibility still requires checking
We may earn a commission when you buy through this link, at no additional cost to you.
The adapter accepts a worldwide AC input of 100V to 240V at 50Hz to 60Hz and supplies a standard DC 18V output. The attached cord measures 5.9 feet, or 1.8 meters, which is long enough for many charging locations without becoming excessively cumbersome. The listing also states that the cord and adapter have been repeatedly tested and validated for compatibility with the named 18V models.
Its most useful feature is the specificity of its compatibility boundaries. The listing explicitly says that the charger is not compatible with the Hypervolt 42000 038-00, Hypervolt Plus 54020 001-00, or Hypervolt 53000-001-00. That warning matters because several Hypervolt generations look similar but use different electrical arrangements. The package includes one replacement power adapter rather than a battery or device.
This charger is best for someone who can verify that their device carries one of the listed 18V model numbers. It may be less suitable for owners of an older 24V Hypervolt, a Hypervolt Plus, or any product outside the stated range. Confirm the model, output requirements, and connector before purchasing, particularly if the original charger is missing and only the device label is available.
Useful for the 18V Hypervolt 2 Family
The supported list includes the Hypervolt 2 Pro, Hypervolt 2 53200 038-00, and Hypervolt Go 55000 001-00. It also extends to Vyper 2.0, Vyper 3, and Vyper Go, giving this option relevance across several distinct device names rather than a single model.
Worldwide Input and Practical Cord
A 100V to 240V input range supports use in many regions, while the 5.9-foot cord provides flexibility for charging beside a bed, desk, or outlet. The listed CE and FCC status adds useful information for buyers who want documented standards rather than vague safety claims.
We may earn a commission when you buy through this link, at no additional cost to you.
2. 24V Hypervolt Power Cord – Focused Older-Model Support
24V Hypervolt Power Cord
24V DC output
110-240V AC input
ETL CE FCC RoHS
Multiple model numbers
This replacement 24V power cord carries a 4.1 rating and is intended for several older or distinctly identified Hypervolt and Hypervolt Portable models. Its compatibility references include HPI5300000100, 53000 001-00, 42000 038-00, and 4200003800, making it most relevant when those numbers appear on the original charger or device.
Pros
- Targets 24V Hypervolt devices
- Lists numerous part numbers
- Recognized safety standards
- Wide AC input range
Cons
- Not compatible with 18V
- Excludes Vyper and Go
We may earn a commission when you buy through this link, at no additional cost to you.
The charger uses an AC input range of 110V to 240V at 50Hz to 60Hz and provides a 24V output. The listing states that it was tested with a Hyperice Hypervolt massage gun and identifies ETL, CE, FCC, and RoHS listing. One replacement 24V charger is included in the package, so buyers do not need to combine it with a separate power cord unless their setup requires that arrangement.
Compatibility is necessarily limited. The seller explicitly says this charger is not for 16.8V devices, 18V devices, Hyperice Vyper products, or Hyperice Go products. This makes the product a narrower option than the leading 18V alternatives, but that specificity can be beneficial for someone who knows their device requires 24V. The listed part numbers also provide several ways to confirm that it matches the original system.
The strongest case for this charger is a user replacing a 24V Hypervolt Portable, a 53000-series unit, or a 42000 038-00 device. It is a poor choice for a Hypervolt 2, Go, or Vyper owner. Before ordering, compare the printed voltage, current requirement, connector, and part number with the old adapter. Do not rely on the broad Hypervolt name alone, because chargers for different Hypervolt generations are not interchangeable.
Part Numbers Simplify Identification
The listing provides numerous compatible identifiers, including HPI5300000100, 53000 001-00, 42000 038-00, and several replacement part numbers. These references are more useful than a general model family because they can be checked against the charger or device label.
Clear Boundaries for 24V Owners
The explicit exclusions for 18V, 16.8V, Vyper, and Go products help narrow the decision. A buyer who can match one of the listed 24V identifiers gains a more targeted option, while other owners should avoid choosing by appearance alone.
We may earn a commission when you buy through this link, at no additional cost to you.
3. Superer Hypervolt Charger – Warranty-Backed 24V Option
Superer Hypervolt Charger
26V maximum output
One-amp current rating
ETL certification
24-month warranty
The Superer charger has a 4.3 rating and focuses on Hypervolt and Hypervolt Plus devices that use the 24V-class charging arrangement. Its listed output is 26V at 1A and 26W, with the seller stating that it is also compatible with a 24V, 1A, 24W requirement. That makes the adapter relevant to several devices requiring the higher-voltage output.
Pros
- Long manufacturer warranty
- Supports Hypervolt Plus
- ETL-certified construction
- Wide AC input range
Cons
- Requires no more than 1A
- Excludes newer 18V families
We may earn a commission when you buy through this link, at no additional cost to you.
Compatibility is tied to a list of device and part numbers, including 56441, 53100 038-00, 54020 001-00, SK03T1-2600100W2, SK03T12600100W2, SKO3T1-2600100W2, HU10561-16022B, and 30070 001-00. The listing also says not to buy it if the massage gun requires more than 1A. The broad 100V to 240V input range supports use across different household supply systems.
Two support features distinguish this option. It is described as ETL certified, with individual units tested for stable voltage, efficient conversion, and protection against overcurrent, overheating, and short circuits. The listing also states a 24-month manufacturer warranty, which is longer than the one-year coverage described for some competing products in this roundup.
This is a strong candidate for an owner of a compatible Hypervolt Plus or another listed 24V/1A device who values a long warranty. It is not suitable for the Hypervolt Go, Go 2, Hypervolt 2, Hypervolt 2 Pro, Vyper family, 16.8V devices, 18V devices, or 15V Normatec equipment. Verify the current limit and model number before buying, and ensure that the connector matches the charging port.
Longer Warranty Coverage
A stated 24-month manufacturer warranty gives this charger a notable support advantage. It is especially appealing when the original adapter has failed and the replacement is intended to remain in regular use for an extended period.
Defined Electrical Limits
The 26V, 1A, 26W output is clearly presented alongside compatibility with 24V, 1A, 24W requirements. Buyers should not stretch the stated limit to devices that need more current, even if the connector or product name appears similar.
We may earn a commission when you buy through this link, at no additional cost to you.
4. 18V Charger for Hyperice Hypervolt 2 2 Pro Go 2 Massage Gun – Balanced Compatibility
18V Charger for Hyperice Hypervolt 2 2 Pro Go 2 Massage Gun
18V DC output
100-240V AC input
Six-foot power cable
UL-certified cord
This 18V charger earned a 4.4 rating and offers one of the strongest combinations of model coverage, documentation, and practical details in the roundup. It is designed for the Hypervolt 2, Hypervolt 2 Pro, Hypervolt Go, and Hypervolt Go 2, and the listing also identifies it as an AC adapter for the Vyper 3, Vyper 2, and Vyper Go.
Pros
- Strong 4.4 customer rating
- Covers 18V device families
- UL certification stated
- Comprehensive protections
Cons
- Limited to 18V devices
- Several models explicitly excluded
We may earn a commission when you buy through this link, at no additional cost to you.
Its worldwide input specification is AC 100V to 240V at 50Hz to 60Hz, and its output is a Class 2 DC 18V supply. The attached power cable measures 6.0 feet. According to the listing, the cord is UL certified with report reference E482416, while the adapter includes short-circuit, overcurrent, overvoltage, and overtemperature protection. It is also described as having been aged and validated for the Hypervolt 2.
The compatibility exclusions are especially clear. It is not intended for the Hypervolt 42000 038-00, Hypervolt Plus 54020 001-00, or Hypervolt 53000-001-00, and it explicitly does not provide 24V or 26V output. That makes the charger safer to evaluate than an ambiguously labeled alternative, provided the buyer owns one of the supported 18V systems. The trade-off is that it cannot serve a 24V Hypervolt or a compatible 26V/24V Hypervolt Plus.
This is our Editor's Choice because its 4.4 rating is tied for the highest in the group, while its model list, electrical specifications, certification information, and protection features are presented with unusual clarity. It is a strong all-around option for newer 18V Hypervolt and Vyper owners. Verify the model number and connector before ordering, particularly if the device has been sold under more than one product name.
Well-Documented Electrical Safety
The stated UL certification for the power cord, Class 2 18V output, and four named forms of protection make this one of the better-documented options. Those details help buyers compare more than appearance and broad compatibility language.
Coverage Across 18V Families
The adapter addresses Hypervolt 2, 2 Pro, Go, Go 2, Vyper 2, Vyper 3, and Vyper Go. That breadth is valuable for households with more than one compatible Hyperice device, although every model still needs to match the stated voltage and connector.
We may earn a commission when you buy through this link, at no additional cost to you.
5. 18V Hypervolt Go Replacement – Wide New-Model Range
18V Hypervolt Go Replacement
18V DC output
100-240V AC input
5.9-foot power cable
Protected copper connector
This replacement Hypervolt charger has a 4.3 rating and is designed for 18V systems in the Hypervolt 2, Hypervolt 2 Pro, Hypervolt Go, Hypervolt Go 2, and Vyper product ranges. Its compatibility description specifically includes Vyper 2.0, Vyper 3, and Vyper Go, giving it broad relevance for owners of newer 18V devices.
Pros
- Supports many 18V models
- Protected DC connector
- Wide AC input range
- Simple installation
Cons
- No warranty duration stated
- Not for 24V Hypervolt
We may earn a commission when you buy through this link, at no additional cost to you.
The charger accepts AC 100V to 240V at 50Hz to 60Hz and includes a 5.9-foot, or 1.8-meter, cable. Its product information highlights premium copper material in the DC connector and built-in protection against short circuits, overcurrent, overvoltage, and excessive temperature. The simple installation also means the replacement can be connected without navigating a complex adapter assembly.
One important limitation is the absence of a stated warranty period in the supplied product information. The listing instead directs customers with questions or concerns to contact the seller. It also makes clear that the charger will not work with the Hypervolt 42000 038-00, Hypervolt Plus 54020 001-00, or Hypervolt 53000-001-00, all of which sit outside its 18V target range.
This adapter suits a buyer who can match the device to one of the named 18V models and wants a conventional wall charger with a full-length cord. It is less compelling for a 24V system or for someone who prioritizes a clearly stated manufacturer warranty. Check the model label, charging-port shape, and original output specification before ordering, and stop if any of those details conflict with the listing.
Connector Construction and Protections
The copper DC connector and built-in short-circuit, overcurrent, overvoltage, and temperature protections make the electrical design easy to understand. These claims are relevant to buyers who want more than a simple compatibility statement.
Suitable for Multi-Device Households
A single adapter covering several 18V Hypervolt and Vyper families can simplify replacements across a household. The actual charging connector must still match, so model verification remains essential.
We may earn a commission when you buy through this link, at no additional cost to you.
6. 18V Massage Gun Charger Replacement for Hypervolt 2 Pro Hypervolt 2 Hypervolt Go Hypervolt Go 2 Vyper 3 – Certified 18V Value
18V Massage Gun Charger Replacement for Hypervolt 2 Pro Hypervolt 2 Hypervolt Go Hypervolt Go 2 Vyper 3
18V DC output
100-240V AC input
Six-foot power cable
ETL CE FCC RoHS
This VHBW 18V replacement has a 4.4 rating and combines broad compatibility with a clear set of safety standards. It supports the Hypervolt 2 Pro, Hypervolt 2, Hypervolt Go 55000 001-00, Hypervolt Go 2 55200 001-00, Vyper 2.0, Vyper 3, and Vyper Go, covering the principal 18V families identified in the listing.
Pros
- Highest-tier customer rating
- Extensive 18V compatibility
- Multiple safety certifications
- Exchange support offered
Cons
- Excludes several older models
- Only 18V output
We may earn a commission when you buy through this link, at no additional cost to you.
The power supply accepts AC 100V to 240V at 50Hz to 60Hz and delivers 18V through a six-foot, or 1.8-meter, cable. It is described as ETL, CE, FCC, and RoHS certified, with overvoltage, overcurrent, and short-circuit protection. Those standards and protections make it one of the better-equipped options for buyers who prioritize documented safety features.
Support is another differentiator. The listing states that VHBW offers a 15-month worry-free exchange and lifetime friendly customer service, and it directs buyers with compatibility questions to contact the seller using their order information. The exclusions remain important, however: the charger does not work with the Hypervolt 42000 038-00, Hypervolt Plus 54020 001-00, or Hypervolt 53000-001-00.
This is our Best Budget pick not because it is the least expensive product listed, but because it combines a top-tier 4.4 rating with a six-foot cable, broad 18V support, several certifications, and exchange coverage. It is best for an owner of a supported 18V model who wants a well-rounded replacement without paying for a feature set that their device cannot use.
Certification and Protection Combined
The stated ETL, CE, FCC, and RoHS certifications provide a stronger documentation foundation than a generic charger. Overvoltage, overcurrent, and short-circuit protection add practical layers of reassurance for regular charging.
Support for Common 18V Models
Specific references for the Hypervolt Go 55000 001-00 and Go 2 55200 001-00 make it easier to compare the charger with the model printed on the device. The same checks should still be performed for every listed Vyper and Hypervolt 2 variant.
We may earn a commission when you buy through this link, at no additional cost to you.
7. 18V Hypervolt Go 2 Charger – Worldwide Input Support
18V Hypervolt Go 2 Charger
18V DC output
100-240V AC input
4.9-foot power cord
CE FCC RoHS certified
This 18V Hyperice charger has a 4.1 rating and supports the Hypervolt Go 2, Hypervolt Go 55000 001-00, Hypervolt 2 53200 038-00, Hypervolt 2 Pro, Vyper 2.0, Vyper 3, and Vyper Go. It is therefore a relevant option for many of the same 18V devices covered by the higher-rated 18V alternatives.
Pros
- Worldwide input compatibility
- Broad 18V model support
- Five stated protection features
- Exchange service included
Cons
- Shorter cord than leaders
- Lower customer rating
We may earn a commission when you buy through this link, at no additional cost to you.
Its input specification is 100V to 240V, and the output is 18V DC. The product information describes a 150-centimeter, or 4.9-foot, power cord. Although shorter than the six-foot cords offered by several competitors, it still provides enough reach for many bedside tables, desks, and nearby wall outlets without taking up excessive storage space.
The listing states that the charger is CE, FCC, and RoHS certified and includes a multi-protection system for overvoltage, overload, overcurrent, overheating, and short circuits. It also mentions a 30-day refund and 12-month exchange arrangement, along with customer support. Those are useful distinctions for shoppers comparing a shorter cord against the additional service period and certifications described by other products.
This charger is best for a supported 18V owner who values a worldwide input range, a five-part protection system, and stated after-sales coverage. It is not intended for the Hypervolt 42000 038-00, Hypervolt Plus 54020 001-00, or Hypervolt 53000-001-00. Since its 4.1 rating sits below the leaders, buyers with several viable options may prefer a higher-rated charger with a longer cable.
Compact Cord for Everyday Charging
The 4.9-foot cord is shorter than the six-foot options near the top of the list. That can be convenient for storage and travel, provided the outlet is close enough to the charging location.
Five-Layer Protection Claim
The stated protections cover overvoltage, overload, overcurrent, overheating, and short circuits. Combined with the listed CE, FCC, and RoHS standards, this provides a more complete safety description than many basic replacement adapters.
We may earn a commission when you buy through this link, at no additional cost to you.
8. VHBW 24V Hypervolt Charger – Rugged 24V Travel Option
VHBW 24V Hypervolt Charger
24V one-amp output
100-240V AC input
5.9-foot power cord
Compact travel housing
This VHBW replacement charger has a 4.2 rating and targets 24V Hypervolt Portable devices, including the HPI5300000100, 53000 001-00, and 42000 038-00. Its list of replacement part numbers is extensive, providing several identifiers that can be compared with a damaged original adapter.
Pros
- Durable connector construction
- Tangle-resistant cable
- Clear charging indicator
- Travel-friendly size
Cons
- Not for 18V models
- Excludes Vyper and Go
We may earn a commission when you buy through this link, at no additional cost to you.
The electrical output is DC 24V at 1A, and the input range is 100V to 240V. The total cord length is 5.9 feet. Product information highlights reinforced connectors, a tangle-resistant cable, and a flame-retardant casing designed to tolerate everyday wear, drops, and travel. The charger also includes short-circuit and overvoltage protection.
Portability is a notable emphasis. The compact housing is intended for easy storage, the cable provides reasonable reach, and a clear charging indicator helps show when the device is receiving power. These qualities can make the adapter more practical for frequent users who travel between outlets, although the product information does not state a specific warranty duration.
This charger is best for a compatible 24V Hypervolt Portable or 42000-series owner who values physical durability and travel convenience. It is not a replacement for a 16.8V or 18V model, nor is it intended for Vyper or Hypervolt Go devices. Check the old adapter's output label and connector before purchasing, since the product's broad device references do not make it suitable for every Hypervolt family.
Built for Repeated Handling
Reinforced connectors, a tangle-resistant cable, and a flame-retardant casing are the standout construction features. They are particularly relevant to an adapter that may travel in a bag or be moved between charging locations frequently.
Clear Onboard Charging Feedback
The listing highlights a clear charging indicator light. This provides immediate visual feedback while the massage gun is connected, reducing uncertainty about whether the adapter is actively supplying power.
We may earn a commission when you buy through this link, at no additional cost to you.
9. 18V Hypervolt 2 Power Cord – Straightforward 18V Adapter
18V Hypervolt 2 Power Cord
18V one-amp output
100-240V AC input
Six-foot power cord
UL FCC certified
This replacement AC adapter has a 4.0 rating and is intended for 18V Hypervolt 2, Hypervolt 2 Pro, Hypervolt Go, and Hypervolt Go 2 devices. The listing also describes it as suitable for Vyper 3, Vyper 2, and Vyper Go, making it another broad option within the 18V category.
Pros
- Covers principal 18V models
- Long six-foot cord
- Wide AC input range
- Output protection included
Cons
- Lowest customer rating
- Limited compatibility exclusions
We may earn a commission when you buy through this link, at no additional cost to you.
The power supply uses a 100V to 240V input range, provides a maximum output of 18V at 1A, and includes a six-foot power cord. Its product information states that it is UL and FCC certified and includes overvoltage-output and overcurrent-output protection. The package is a replacement AC-to-DC power adapter for compatible Hyperice devices.
The main trade-off is the 4.0 rating, which is lower than every other product in the roundup. That does not automatically make the charger unsuitable, but it may cause a buyer to favor a higher-rated alternative when comparable specifications are available. The listed compatibility exclusions for the 42000 038-00, Hypervolt Plus 54020 001-00, and 53000-001-00 are also consistent with the 18V focus.
This adapter is best for a straightforward replacement need involving one of the named 18V models. Its 18V, one-amp output and six-foot cord align with the general specifications of several leading competitors, while the stated UL and FCC certification provides useful documentation. Confirm the connector and model number before ordering, especially if the original charger is unavailable and the only available information is the device family name.
Simple 18V Power Delivery
A maximum 18V, one-amp output and a 100V to 240V input range provide a clear electrical target. Buyers should compare these figures with the original charger and only consider the adapter if they match.
Useful Cord Length
The six-foot cord is among the longer options in the roundup. It offers more placement flexibility at a wall outlet while remaining long enough for ordinary charging setups.
We may earn a commission when you buy through this link, at no additional cost to you.
10. Dexpt Charger Fit for Hypervolt Charger Hyperice Hypervolt Plus Massager – Precise 24V Alternative
Dexpt Charger Fit for Hypervolt Charger Hyperice Hypervolt Plus Massager
26V maximum output
24W maximum power
5.5 by 1.7 millimeters
One-year warranty
The Dexpt replacement charger has a 4.4 rating and is aimed at Hyperice Hypervolt devices, including the Hypervolt Plus, that use a 24V-class supply. It also provides one of the clearest connector descriptions in the group: the product information specifies a 5.5 by 1.7 millimeter connector, giving buyers a measurable way to check physical fit.
Pros
- Explicit connector dimensions
- Supports 24V requirements
- One-year warranty
- Wide AC input range
Cons
- Excludes 18V and Go
- No model-number list
We may earn a commission when you buy through this link, at no additional cost to you.
The maximum output is 26V at 1A and 26W, and the listing states that this is compatible with a 24V, 1A, 24W requirement. Its input range is 100V to 240V. A one-year manufacturer warranty is included, and the product information says the charger passed stringent safety testing designed to protect the device and user.
Compatibility boundaries are exceptionally important here. The charger is not designed for the Hypervolt Go, Go 2, Hypervolt 2, or 2 Pro, and it does not fit Hypersphere, Vyper, or any 16.8V or 18V device. Its information also emphasizes that buyers should confirm the model and voltage before purchase. The package contains one power adapter for 24V devices.
This is our Best Premium pick because it combines a 4.4 rating, a one-year warranty, detailed output information, and an explicitly measured connector. It is a premium choice for a compatible 24V Hypervolt or Hypervolt Plus owner, not for the broad group of newer 18V devices. The absence of a detailed model-number list makes the connector and voltage checks especially important before purchase.
Connector Dimensions Reduce Guesswork
The stated 5.5 by 1.7 millimeter connector is unusually useful for replacement shopping. Measuring the original plug or charging port can confirm physical compatibility before an order is placed.
Premium Support and Output Detail
A stated one-year manufacturer warranty and clearly published maximum output make this option attractive for a compatible 24V user. The 26V maximum is presented alongside the supported 24V, 1A, 24W requirement, though it should not be mistaken for universal Hypervolt compatibility.
We may earn a commission when you buy through this link, at no additional cost to you.
Buying Guide – How to Choose the Best Hyperice and Hypervolt Replacement Charger
The safest replacement is the one that matches the voltage, current, connector, and exact device model of the original charger. Use the product identifiers and output label as evidence, not the product name alone, because multiple Hyperice and Hypervolt families use different charging systems.
Confirm the Device Model Number
Summary: Match an exact model number before buying.
Match Voltage and Current
Summary: Voltage, current, and wattage must all match.
Measure the Charging Connector
Summary: Verify diameter, tip shape, and connector style.
Review the Voltage Exclusions
Summary: Treat every stated incompatibility as a deal-breaker.
Check Safety Certifications
Summary: Prefer named certifications and defined protections.
Consider Cord Length and Portability
Summary: Choose reach, portability, and storage together.
Evaluate Warranty and Support
Summary: Compare warranty type, duration, and exchange terms.
Check the Package Contents
Summary: Confirm whether the package is complete.
How to Use and Care for Your Hyperice and Hypervolt Replacement Charger
Begin by disconnecting the old charger and inspecting the massage gun's charging port, cable, and adapter for damage. Compare the model and voltage markings with the replacement listing before connecting anything. Confirm that the connector enters straight without force and that the charger's output rating matches the device requirements. A replacement charger should be treated as a specific electrical accessory, not as a generic USB-style wall plug.
Connect the charger to a dry wall outlet and then attach it to the massage gun according to the device's charging instructions. Keep the connector seated, but do not pull it out by the cord. Avoid placing the adapter or cable near water, excessive heat, damaged electrical contacts, or furniture edges that could pinch the wire. Do not use the charger if the plug, housing, or connector shows cracks, discoloration, melting, or other visible damage.
Unplug the charger when it is not in use, particularly before changing wall outlets or storing the device for an extended period. Route the cable so it does not become tightly coiled or trapped, and keep the charger dry. Periodically inspect the connection for heat, discoloration, or a loose fit, and stop using it if any of those signs appear. Because compatibility depends on the exact model, keep the model and voltage information with the charger for future reference.
Frequently Asked Questions
Is there one Hypervolt replacement charger that fits every Hypervolt model?
No. The products in this guide are divided among 18V, 24V, and 26V-capable charging arrangements, and many listings explicitly exclude certain models. A charger may look physically similar while having a different voltage, current requirement, connector, or part number. Find the model number on your device or original charger, then choose a replacement whose supported list includes it.
Can I use an 18V charger for a 24V Hypervolt?
No. An 18V adapter does not provide the voltage required by a device designed for a 24V or 26V-class supply. The products that support 18V devices in this roundup specifically exclude the Hypervolt 42000 038-00, Hypervolt Plus 54020 001-00, and 53000-001-00. Using the wrong voltage class can prevent charging and may create a safety risk.
How do I know if my Hypervolt uses an 18V charger?
Read the output label on the original charger, check the model number on the massage gun, and look for matching references in the replacement listing. The 18V options here support named Hypervolt 2, Hypervolt 2 Pro, Hypervolt Go, Hypervolt Go 2, and selected Vyper models. If the original charger is missing, confirm the model number in the device documentation before selecting a voltage.
What connector size does the Dexpt Hypervolt Plus charger use?
The Dexpt product information specifies a 5.5 by 1.7 millimeter connector. Measure the original connector and the charging-port opening before ordering, and also check the tip shape. A measurement alone should still be paired with the required 24V and 1A compatibility because a matching physical plug does not establish that the electrical output is correct.
Are the 26V-output chargers suitable for 24V devices?
Two products in the roundup state that a 26V, 1A output is compatible with a 24V, 1A, 24W requirement. That makes them relevant for certain compatible 24V devices, including the Hypervolt Plus in the Dexpt listing. You should still match the model and connector because the broader 26V output does not make the charger suitable for every 24V-labeled product.
Do all of these replacement chargers include protection features?
The supplied product information describes different combinations of overvoltage, overcurrent, overload, overtemperature, and short-circuit protection. Several also list ETL, UL, CE, FCC, or RoHS certifications. These are positive indicators, but they do not override compatibility requirements. The device model, voltage, current, and connector must still be matched before use.
Which charger has the longest stated warranty in this roundup?
The Superer charger has the longest stated manufacturer warranty at 24 months. The VHBW 18V product states a 15-month exchange arrangement, while the Dexpt charger includes a one-year manufacturer warranty. Coverage types differ, so compare the terms carefully instead of treating every warranty or exchange policy as identical.
What if the original charger is missing and I cannot identify the model?
Look for the model number on the massage gun itself, often on a label beneath the battery, on the handle, or in the original documentation. Record the voltage and connector appearance as additional clues. If the model remains unknown, avoid an order based solely on a product photograph or the word Hypervolt, because visually similar chargers in this category can use different voltages and connectors.
Final Thoughts on Choosing the Best Hyperice and Hypervolt Replacement Charger
The DONYOIE 18V charger stands out as the Editor's Choice because it combines a 4.4 rating with detailed model support, UL certification information, a six-foot cord, and clearly named electrical protections. The VHBW 18V replacement earns the Best Budget designation through its 4.4 rating, broad 18V coverage, multiple certifications, and exchange coverage, while the Dexpt 24V charger offers the Best Premium combination of a 4.4 rating, a measured connector specification, a one-year warranty, and well-defined output.
The key priority is compatibility rather than the newest-looking adapter. Confirm the exact model, output voltage, current limit, wattage, connector dimensions, and whether the device requires a complete charger or only a cord. A listing that explicitly rejects your model number is telling you to choose another product. Even among chargers with strong safety claims and customer ratings, using a mismatched supply can lead to charging failure or damage.
Finally, check the current product listing before ordering because availability, seller details, certification claims, and prices can change. Compare the replacement against the specifications of the original charger, save the relevant model information, and keep the product documentation with the accessory. Those final checks make a replacement purchase much more predictable.